SE ELECTRONICS DM1 MICROPHONE PRE

DINAMYT DM1

EXPLOSIVE LEVEL FOR ALL YOUR PASSIVE MICROPHONES

An ultra-slim active inline preamp that fits seamlessly between your microphone and mic preamp, providing a massive +28 dB of clean, transparent gain for all your dynamic and passive ribbon microphones.

RECOMMENDED USE

Dynamic and passive ribbon microphones

DETAILS

· Sophisticated Class A design and specially selected high-quality FETs for coloration-free signal boost

• Very low output impedance and almost half the noise of any other product on the market to raise the level of any microphone clearly.
• Always a consistent +28 dB regardless of the connected load to allow for lower output microphones
• Provides enhanced level to a preamp, all without adding noise or coloration, breathing new life into your favorite passive microphones.
• The all-metal housing and premium finish ensure the DM1 can handle demanding lifestyles on the road or in the recording/broadcast studio.

· Gold-plated XLR connector for reliable, loss-free signal connection

Specs

Force

· Electrical impedance 135 ohms

• Recommended load impedance >1K ohms
• Connectivity3-pin XLR male/female connector

· Power supply48 V phantom power (P48 according to IEC 61938)

Sound

· Frequency range 10 Hz - 120 kHz (-0.3 dB)

• Gain 28dB
• Current consumption3.0 mA
• Maximum output level (0.5% THD) 8.3 dBV (2.6 V)
• Output noise level9 µV (a-weighted)

· Input impedance 10k ohms

Dimensions

· Preamplifier diameter 19 mm (0.75 in.)

• Preamplifier length96 mm (3.78 in.)

· Preamplifier weight96 mm (3.78 in.)

What's in the box

DM1

SE Logo Sticker

User manual with warranty card.